Doosan presents its innovations at Intermat 2018

Doosan presents its innovations at Intermat 2018

Doosan presents its innovations at Intermat 2018

Born in 1977, Doosan Construction Equipment Division, produced and distributed its first building machinery one year later, in 1978.

This year the construction division commemorates its 40th birthday, which is going to be celebrated in Paris, at Intermat trade fair, from the 23th to the 28th of April. In this occasion Doosan will not only celebrate its foundation anniversary but also the purchase of more than 400 units.


D-ECOPOWER is the new Doosan technology concerning the increasing of the productivity level, 26%, and the decreasing of the fuel consumption, 12% saved.

 This innovation doesn’t allow a constant flow of hydraulic oil, on the contrary thanks to different sensors, it’s regulated on the use of the machinery. D-ECOPOWER reduces the leakages of pressure, thanks to the new principal closed-centre distributors.

D-ECOPOWER will be installed on the new mini excavators DX490LC-5 and DX530LC-5.


All the Stage IV Doosan Construction Equipment machineries, excavators, mini-excavators, skid steer loaders and dumpers will be completed with the telematic technology DoosanConnect,which allows to supervise and communicate remotely with the machineries.

With DoosanConnect it’s possible to control the performances of the building machineries, favouring a preventive service and pledging a higher security.

New products

Doosan enlarged its selection of excavators with new models DX160LC-5 HT and DX180LC-5 HT of the series Stage IV. These tracked excavators are projected with High Track configuration, it means that the machineries are equipped with higher rubber tracks, appropriate for approaching all the surfaces, even the hardest. The clear height grew from 410/460mm of the old models, to 615mm of the new excavators, increasing of 15/20cm.

The mini-excavators will be present at Intermat trade fair 2018 with the new model Doosan DX19, with a Diesel Kubota engine D722 (9,9kW - 2500 r/m) with an innovative and last-generation hydraulic system.